Safety Tips

Why Does My Breaker Keep Tripping? 5 Common Causes

A breaker that trips once is doing its job. A breaker that trips every week is trying to tell you something. Here is how to tell what.

Circuit breakers are safety devices. When one trips, it has detected a problem and cut the power before wires overheat. One trip after running the microwave and the toaster together is normal. Repeated trips are a warning sign.

1. An overloaded circuit

The most common cause. Too many devices on one 15 or 20-amp circuit draw more current than it is rated for. Space heaters, hair dryers and window AC units are frequent culprits.

2. A short circuit

A hot wire touching a neutral or ground wire causes a sudden surge of current. Look for scorch marks on outlets, a burning smell or a breaker that trips instantly when you reset it.

3. A ground fault

Common in kitchens, bathrooms, garages and outdoors, where moisture is present. GFCI outlets and breakers trip to protect you from shock.

4. A failing appliance

If the breaker trips only when one appliance runs, the appliance may have a damaged cord or motor. Unplug it and see if the trips stop.

5. An old or worn breaker

Breakers wear out. Some older panel brands are known to fail, either tripping too often or not at all.

What to do

  1. Unplug a few devices and reset the breaker once.
  2. If it trips again right away, leave it off.
  3. Never tape a breaker on or replace it with a larger one.
  4. Call a licensed electrician to find the cause.

Our $89 diagnostic finds the real cause, and the fee is credited to your repair.

Share this article
In this article

Join the Safety Club

Annual safety check, priority scheduling and 15% off repairs for $14.95 a month.

Electrical emergency?

Sparks, smoke or a burning smell? Call us 24/7. An electrician is usually there in about an hour.

More from the blog.